wood chips glue mixing machine|sawdust glue mixer
In the production process of sawdust compressed pallets, sawdust and glue need to be mixed. This process is called the glue mixing process. The sawdust glue mixing machine is an important equipment to realize this process. It is one of the important processes and key equipment in the production of sawdust press pallets. The distribution of glue in the sawdust-forming pallet directly affects the strength and cost of the pallet. Therefore, the quality of the sawdust glue mixing machine directly affects the quality of the wood pallet.
Introduction of sawdust glue mixing machine
The glue mixing machine is a machine developed by our factory for the production of environmentally friendly compression sawdust pallets. It plays an important role in the wood chip pallet production line. The proportion and uniformity of the mixed glue directly determine the quality of the pallet. The structure of the glue mixing machine is relatively simple, and the production process is not complicated. Inside the machine, there is a shaft with blades that rotates in a cylinder or groove. This shaft is connected to a speed-regulating motor, so the speed of the shaft can be adjusted. Adjust the speed of the motor according to the size of the sawdust particles and the amount of glue, so that the glue and sawdust can be mixed more evenly.
The structure of the glue mixing machine
A sawdust glue mixing machine is a machine that mixes sawdust into a mixture of suitable consistency. There is a main shaft inside the machine, which is connected to the speed regulating motor under the machine through a coupling. The inside of the glue mixing machine can be divided into four working areas. The main shaft of the feed zone is equipped with a mixing head body and blades, which can mix the materials evenly. A metering device is installed at the discharge port of the glue mixer, which can control the weight of a single discharge. The amount of materials required to produce different specifications of molded wood chip pallets is different. Therefore, the number of materials needed for one time can be calculated in advance and then set through the control panel.
Advantages of wood chip glue mixing machine
This equipment is mainly used for the process of molding wood chip pallets. Use waste materials such as wood shavings and wood chips to produce pallets after mixing with glue. This new type of glue mixing machine solves the problem that the traditional machine can not continuously feed and mix the glue, the glue is not uniform, and the meter can not be measured when discharging. This glue mixing machine has the advantages of uniform glue mixing, fast speed, and continuous operation. It can be widely used in molded pallet production lines. This glue mixing equipment has a simple structure and convenient operation. The sawdust pallet produced after mixing the glue is strong and environmentally friendly. At the same time, it can also be used for mixing glue of other materials, which has broad market prospects.
Parameters of the glue mixing machine
| product name | Sawdust glue mixing machine |
| Type of glue mixing machine | Multifunctional glue mixing machine |
| power | 4kw |
| Material type | Solid-liquid materials |
| Suitable materials | Sawdust |
| Power type | electricity |
| Layout form | Vertical |
| Processing volume per time | 100—1000L |
Application of Glue Mixer in Molded Pallet Production Line
The wood enters the wood shredder after being chipped by the wood chipper machine. The wood chips are crushed in the wood crushing machine and then dried in the drum dryer machine. The dried raw materials need to be stirred and mixed evenly with environmentally friendly glue in the glue mixer. In this way, all the broken fibers can absorb a fixed amount of glue, and ultimately ensure that the finished fiber is tightly connected and the product quality can reach the highest strength. Finally, the raw materials after mixing the glue are sent into the mold of the compression wood molding machine. Different sizes and patterns of molds can be used to mold different types of pallets using high-temperature and high-pressure technology.
Precautions for the use of glue mixing machine
- The glue mixer should be placed on a flat place to avoid movement due to vibration after the machine is started.
2. The direction of rotation of the mixing drum should be in accordance with the direction indicated by the arrow. If not, the wiring of the motor should be corrected.
3. After starting up, you need to pay attention to the normal operation of the various parts of the glue sawdust mixer. When shutting down, check whether the blades of the glue mixer are bent and whether the screws are loose.
Company Profile
our company has been committed to research in the field of molding technology and the recycling of waste materials. Excellent achievements have been made in the design of molded pallet machinery and the improvement of the production line. The company continuously optimizes the production process and equipment performance and produces a complete set of molded pallet production lines for customers.
